Six Asphalt Pavement Maintenance Tips

While most asphalt paving contractors do their due diligence while installing a new driveway in a customer’s home, they can always do more. Many companies offer maintenance and repair services, but they do not offer their customers enough information about how to keep their driveway in tip-top condition. It is important to give this information to customers up front, as it allows them to take preventative measures.

Here are six asphalt pavement maintenance tips that all Quakertown City asphalt paving companies should be informing customers about.

  1. Avoiding Cracks

One of the most common ways that driveways are cracked is through tree and shrub roots. If there are any trees or roots right near the driveway, it is better to remove them and place them in the ground somewhere else. Move them to the other side of your garden.

Unlike concrete, asphalt is not going to crack during the cold weather. No one needs to worry about that. Some issues can occur in very hot temperatures. If there is a week of very hot, sunny weather, homeowners should keep an eye on the driveway just to make sure everything is in good shape.

  1. Seal Cracks

Regular sealing is so important to ensuring that an asphalt pavement lasts for decades. Even without sealing, asphalt will last at least two decades. But sealing every two to four years is going to maintain the appearance and structural integrity of the driveway. It is also better for car tires to remove any small holes or gaps the moment they are noticed.

  1. Have Proper Drainage

While asphalt is very durable, it is like every other material in the world. Eventually it is going to get worn out. And the more it is exposed to water, the greater the chances of that wear and tear. Some water exposure is normal, and you do not need to freak out if the rain is falling on the driveway. But it is a good idea to set up a proper drainage system so the water is flowing away quickly. Standing water is bad for any driveway.

  1. Carefully Plowing Snow

In areas where it snows, it is important to take it slowly while plowing snow off the driveway. A rough hand is only going to damage the surface of the driveway. That is especially true if using a metal shovel. Plastic shovels are much better, as they are not going to leave long lines and scratch marks on the driveway.

  1. Keep the Edges Clear

It is common for people to try and fit as many cars as they can in their driveway. If these cars are stacked behind each other, it is not such an issue. But placing cars side by side can result in them creeping on the edges of the driveway. These edges are often the most vulnerable, especially to heavy cars and trucks. They can chip away over time, ruining the driveway’s appearance.

  1. Keep the Driveway Clean

It may sound obvious, but so many people do not even bother cleaning their driveway. A quick reminder from an asphalt company in Quakertown City after the installation is complete can help a lot. Remind the customer that the quick removal of stains can help maintain a driveway’s appearance. The occasional oil or radiator fluid stain is common. If these are left in place for months, they are much harder to remove. And ensure customers are never using wire brushes, as those will damage the driveway in no time.

About the Author: Robert

You May Also Like